The right side of the lining orients to the window, so you need to know how to determine the right and wrong side before you start your construction. The right side of the lining faces out the window.

Which part of the curtain is the top?

Terms or Lingo of Window Treatment

• Curtain header, heading: The top of the curtain from where it is hung onto a curtain rod ... ( ...
• Drapery or curtain fullness: The fullness of the draperies is really depending on a persons likes or dislikes and naturally the wallet too.

What is the proper placement of curtain rods?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window's inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window's frame.

How do you tell the top from the bottom of curtains?

Measure the height of your floor to the top of your window frame. Curtains that are too short to reach the floor look awkward. Your curtains should touch the floor or even pool slightly on the bottom.

How do you attach blackout lining to tab top curtains?

How To Add Blackout Lining To Existing Curtains

1. Remove the curtains from the pole and lay face down on a flat surface. ...
2. Insert the curtain hooks into the header tape pockets of the lining. ...
3. Hang the curtains, and adjust the placement of the curtain hooks on header tape for improved positioning and drape.

Time Saving Tips for Making Draperies: Face Fabric and Lining Hems

23 related questions found

Do you need to hem blackout lining?

If You're Using The Blackout Fabric As A Curtain Lining

With Blackout fabric linings the hems should be as short as possible 1-2cm on all four sides, this will enable the curtains and the blackout lining to work much better at blocking out the light.

How much narrower should curtain lining be?

Regular lining should be 7.5cm (3") shorter than the curtain fabric. Thermal lining is too bulky to create a double hem, so needs to be 17.5cm (6⅞") shorter than the curtain fabric.

Do lined curtains block out light?

Curtain lining can also have heat retaining properties or light reducing properties such as blackout.

Should you line curtains?

The most important reason to line drapery panels is to help your window treatments last longer. ... Draperies and curtains also look better when they are lined. Lining helps thin fabrics to have a nicer drape at the window, and makes them look more substantial; no one wants wimpy window treatments.

Which way round does thermal lining go?

Feel the surface of blackout or dimout lining; one side will feel smooth, and one will feel rougher. The rough side is the right side, and it should orient to the road.

How do I make my curtains look professional?

TIPS: How to Hang Curtains to Look like Custom Drapes

1. When in doubt, go high. I like to hang my rod 6 inches above the window. ...
2. Have the rod extend beyond the bracket. I tend to do 2-3″, not including the finial.
3. Add at least 10″ to each side of the window. ...
4. Use wide panels. ...
5. Skim, kiss or puddle. ...
6. Steam.

Do you cut off selvage when making curtains?

It depends on the fabric as some selvedges are tighter than others. In the grand scheme of things when you are making curtains the time taken to trim off the selvedges is not that much, but unless the selvedges look very tight I do tend to leave them on.

Can you shorten blackout curtains?

You've finally found the right drapes to complement your decor, but they are too long and need to be altered. Shortening the drapes can be a little intimidating, especially if you don't own a sewing machine or lack the sewing skills. ... Shortening your drapes can be done with iron-on fusible tape or fabric glue.

Can you iron blackout lining?

You never want to iron the insulation side of your blackout curtains as the material will rapidly melt. This could not only damage your curtains but could damage your iron as well. However, thanks to aluminium foil placed beneath, ironing the fabric side of your curtains should be enough to remove wrinkles and creases.

Does blackout lining fabric fray?

Here is what it looks like sewn together. ... But blackout lining won't fray so it's great fabric to just cut and sew into place.

How do you attach lining to premade curtains?

How to Line Store-Bought Curtains

1. Step 1: Lay Out Curtain. Clear out a large space and lay your curtain on the ground. ...
2. Step 2: Pin Fabric in Place. At the top of the curtain, pin the blackout lining in place. ...
3. Step 3: Sew! Attach the blackout lining to the curtain by stitching a single line across the top of the curtain.

How do you make blackout curtains look good?

The Best Ways to Find Blackout Curtains That Aren't Ugly

1. Choose light-filtering curtains rather than blackout curtains. ...
2. Look for a drapey, heavy fabric. ...
3. Use a double curtain rod. ...
4. Sun Zero Oslo Rod Pocket 100% Blackout Window Curtain Panels $27.99 for each panel, Target. ...
5. Use curtain ring clips. ...
6. Majgull Blackout Curtains, IKEA.

What is a blackout curtain liner?

Blackout curtain liners are usually made with thicker fabric and help to block out the daylight that comes through. ... As blackout curtain liners are made with thicker fabric, it can also help with both thermal insulation and noise reduction.

Is the tag at the top or bottom of curtains?

Often, there is a tag or label sewn to the rear of the drape to one side, at the top or bottom of the curtain. This should have the dimensions and the type of fabric used, as well as a date of manufacture.

How big should rod pockets be?

A 1 ½” rod pocket should be used on a standard 1” curtain rod or with a decorative rod 13/16” diameter or smaller. A 3” rod pocket should be used on a standard 2 ½” continental or dauphine rod or on a decorative rod 1 3/8” – 1 ½ ” diameter.

How deep should a hem be on drapes?

The 'Norm' if you like, would be to have a 3 inch (7.5cm) hem. However if you are making curtains that are quite large or long, you may find that a 4 inch (10cm) hem gives proportionately better appearance. Or, if your curtains are going to be quite short, hemming them with a 2 inch (5cm) hem would be sufficient.

How do I make my curtains look luxury?

How to Make Your Curtains Look More Expensive

1. Hang them high—and wide. Mount your curtain hardware as close to the ceiling as possible for a high-end look. ...
2. Use statement hardware. Upgrade basic panels by adding thicker, more substantial hardware to your window treatments. ...
3. Weigh them down. ...
4. Train them.

How do you make curtains look fuller?

To do it, you cut the toilet paper rolls to about three inches in length. Next, remove your curtains from the rod. As you rethread them on the rod, insert a toilet paper roll between every other opening. Rehang your curtains, and they'll look both pleated and fuller.