Measuring for Eyelet Curtains Simply measure between the finials (the decorative ends) to obtain the width. Drop: The inner edge of the eyelet is set down 3cm from the top of the curtain so you need to allow for this when measuring or your curtains will be 3 cm too short!

How do you measure your eyelet curtains?

you will need to hold the tape measure at the top edge of the curtain pole. Then measure down to where you want the eyelet curtains to finish. That will be either to just at the window sill or a few inches past the window sill. Alternatively down to the floor my personal favourite.

Where do you measure curtains from?

Simply measure from the top of the pole to where you want the curtain to finish at the bottom. We will make the curtain with 3cm of fabric above the top underside of the eyelet where it sits on the pole. We add this automatically so simply measure from the top of your curtain pole.

How do you pick the right size curtains?

Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.

Do eyelet curtains need to be double width?

Buying the Correct Size

Measuring for ready made eyelet curtains is very simple. ... Double the width to determine the total curtain width you need for your window. If you are using just one curtain and pulling it to one side, then the total width of this one curtain should be close to the number you just calculated.

How to Measure Eyelet Made to Measure Curtains On A Pole

25 related questions found

How do you calculate fabric for eyelet curtains?

For eyelet curtains you need between 1.5 times fullness (adequate) and 2.25 times fullness (maximum). You will need to make sure you have an even number of eyelets on your finished curtains.

When buying a pair of curtains What is the width?

The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.

How much wider Should a curtain pole be than the window?

We recommend that the track or pole sits 15-20cm above your window, and be wider than your window by 15-20cm on either side.

Are curtain eyelets a standard size?

Curtain eyelets are available in four sizes to suit all curtain pole diameters, they are 25mm, 40mm, 50mm and 66mm.

How wide should curtains be for a 72 inch window?

Let's say you want standard, thick curtains to cover your 72-inch window. You'll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).

What is the standard width of curtains?

The standard lengths of curtains and drapery panels are 63 inches, 84 inches, 95 inches,108 inches and 120 inches. The curtains are 24 and 36 inches in length. 54 inches is a standard width of the panel.

How do I calculate how much fabric I need?

Figure out how much fabric you need with this formula:

1. Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number).
2. Total number of pieces divided by number of pieces that fit into width equals number of rows you need.

How much fabric do I need for gathered curtains?

If you want a gather with a regular amount of fabric, use 1.5 times the width. For a more full-gathered look, double the amount of fabric to 66 inches. How many widths of fabric will I need for a curtain 62 inches wide? It depends how full you want your curtains to be.

How do I measure curtain width?

Measuring Curtains

Measure the full width of the curtain pole or track not the window, excluding any fixtures or finials on the ends. If your curtains are pencil pleat, tab top or eyelet, double this width measurement to account for the way the curtains will be 'gathered' at the top.

Should you hang curtains above window?

A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.

Should my curtains touch the floor?

Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.

How do you measure the diameter of a curtain pole?

You're measuring from the end of the inside mark to the far edge of the paper to get the circumference of your pole. You should be able to measure to the nearest half millimeter.

Can I change curtains to eyelets?

2) Fold under 2cm at the top of the curtain panel and lightly iron. Pin the eyelet tape along the top edge of the fabric and sew into place. Draw around the inside of each ring with a fabric pen, then cut out these circles to create the eyelet holes. 3) Press the eyelets into place at the front of the curtain.

How do you measure the diameter of a curtain ring?

Choose a drapery ring with an inside diameter ½ inch larger than the diameter of the pole or rod. For example, if you have a 1-inch diameter rod, the appropriate ring will have an inside diameter of 1 ½ inches.

Can you hang eyelet curtains on a track?

You can't use eyelet curtains or tab top curtains with a curtain track. ... They also allow a wider range of curtain styles to be hung, including eyelet, tab top and pencil pleat.