The sabre saw is a hand-held powered reciprocating saw. It is similar to, but larger than, a jigsaw. The sabre saw uses a toothed blade, chiefly to cut through wood and other soft materials. The lack of a large sole plate, which a jigsaw possesses, significantly reduces the controllability of the sabre saw.

What is the difference between a jigsaw and a sabre saw?

The terms jigsaw and sabre saw seem to be used interchangeably in the marketplace. And while different tool manufacturers have marketed their saws under both names, there's no recognized difference between a jigsaw and a sabre saw. They're the same tool.

What does a sabre saw do?

On wood it can rip, crosscut, and make angle cuts. The sabre saw, which is basically a portable jigsaw, moves up and down and may have a stroke of as much as 2.5 cm (1 inch). It can rip, crosscut, and make angle cuts.

What is the difference between a sabre saw and a reciprocating saw?

Fitted with a long blade, a reciprocating saw can cut through materials up to 1 foot thick, such as railroad ties. ... The sabre saw has a smaller motor and thus isn't powerful enough for these larger jobs (in some ways the sabre saw can be considered a larger version of the jog saw, which is used for detail work).

Do I need a sabre saw?

Reciprocating Saws are a must have addition to any tool kit. These tools are extremely versatile and are capable of cutting many different materials with ease. These tools are extremely versatile and are capable of cutting many different materials with ease. ...

How To Use A Reciprocating Saw - Ace Hardware

42 related questions found

What is a scorpion saw?

The versatile Scorpion® Saw combines a reciprocating saw, pruner and jigsaw in one. With Autoselect® technology, it automatically adjusts the settings at the push of a button, delivering hassle-free versatility and powerful cutting through timber, metals and plastics.

Is a Sawzall a Sabre saw?

The Confusion: Reciprocating Saw vs Sabre Saw. Reciprocating saws have different names, such as Hackzall and Sawzall. The Milwaukee Company branded their reciprocating saw as 'Sawzall', claiming that they were the first to manufacture a reciprocating saw. ... Thus, a reciprocating saw has become the saber saw.

Can you cut 2x4 with reciprocating saw?

A good reciprocating saw should cut through your 2X4s easily. You shouldn't have to change blades after cutiing just a few 2X4s either. You might try borrowing a saw from a friend to see if you get better results.

Why is it called a reciprocating saw?

A reciprocating saw isn't used as a fine crafting tool. It's a workhorse that gets its name from the short, back-and-forth cutting stroke of the blade. The blade is exposed so you can direct it into tight spaces.

Why is a jigsaw saw called a jigsaw?

The term jigsaw comes from the special saw called a jigsaw that was used to cut the puzzles, but not until the saw was invented in the 1880's. It was around the mid 1800's that jigsaw puzzles started to become popular with adults as well as children.

Can a saber saw cut metal?

Reciprocating saws can churn through metal, masonry, wood, plaster, fiberglass, stucco, composite materials, drywall and more. The key to a successful cut is using the right type of blade for the material you are cutting.

What stroke does a saber saw cut on?

While saber saws can be purchased in a range of sizes and power ratings, a one-quarter horsepower saw with a three-quarter-inch stroke will suffice for most jobs. Saber saws with variable speed controls are handy for some kinds of cuts. The saber saw can be fitted with a variety of blades for different purposes.

What is a bayonet saw used for?

n. A portable power jigsaw used to cut straight or curved lines in wood, plastic, or soft metals.

Can I use a reciprocating saw to cut tree branches?

You can cut branches and limbs with a reciprocating saw. If your tree is small enough, you can cut a tree down. Bear in mind, these saws are ideal for cutting stationary material. If there's a lot of give to your branch or limb, the saw may just shake it rather than cutting through it.

How thick of wood can a reciprocating saw cut?

The deeper the cut, the longer the blade. The thicker the blades, the less bending and wobbling. Heavy-duty blades can be either 7/8-inches wide or 0.062-inches thick.

Can a reciprocating saw cut straight?

The reciprocating saw can be effectively used to cut the wood into a straight line. By choosing the right blade and the correct technique, you will no longer have to wonder about how to use a reciprocating saw to cut wood straight.

How do you cut a straight line with a reciprocating saw?

With the reciprocating saw held in front of you in line with your stomach, press the shoe against the material, aligning the blade to the marked line as closely as possible. Angling the saw slightly downwards, it will begin to rip through the material with the pressure you've applied.

How does a saber saw work?

The powered saber saw uses a reciprocating motor to move a small saw blade up and down across the object to be cut. Blades available include those for wood (coarse or fine cut), metal, drywall/plaster, or plastic.

What is a Tiger saw?

TigerSaw Miter™ is a fully automatic push-feed upcut saw system for cutting miter angles on aluminum, copper, fiberglass, wood, plastics, and more.

Who invented the saber saw?

“The jigsaw is celebrating its 60th birthday. About 60 years ago, Albert Kaufmann, who worked for the Swiss company Scintilla AG, invented the principle of the electric jigsaw.