Thin metal dies (also referred to as wafer thin dies) are smaller and more lightweight than their steel rule counterparts.

What are thin cut dies?

These thin-cut dies to produce exceptional precision cutting every time. Use these dies to cut fabric, felt, pattern papers, card stock up to 440gsm, chipboard of thickness 1mm on Dream Cut machine, Big Shot and Cuttlebug.

Can you cut felt with thin dies?

Wafer thin dies are chemically etched, thin metal dies with raised edges that are not sharp to the touch but will precisely cut through your felt.

Can Thinlit dies cut fabric?

Sizzix Thinlits, Sizzlits, and other wafer-thin dies: You can use these, and most of these variations on the Big Shot shipped with a multi-purpose platform available from Sizzix. However, you'll have limited success in cutting fabric based on the complexity of the shape.

Is sizzix going out of business?

In a move likely in the works for months, Stampin' Up has announced that they are discontinuing the Sizzix Big Shot and also are replacing Sizzix as the manufacturer for their dies. Stampin' Up's new dies will be a slightly different die style than the previous ones.

Tip of the Day: Cutting perfect wafer thin dies from Nicole Petersen

26 related questions found

What materials can Thinlits cut?

Both Thinlits and Framelits cut cardstock, paper, vellum, and metallic foil. Basic, less intricate shapes can also cut fun foam, felt, thin sheets of cork and other, thinner more pliable materials. You may need to adjust your “sandwich” – the assembly of cutting pads, platforms, etc.

Does Cricut cut felt?

When cutting felt with the Cricut Maker, you will use either the fine point/bonded fabric blade or the rotary blade. When cutting felt with the Cricut Explore, you will choose between the finepoint/ bonded fabric blade and the deep cut blade. ... The pink mat was designed for fabric and is commonly used with felt.

What is the best machine for cutting felt?

For cutting felt we recommend the Cricut Maker. The rotary blade makes it a perfect match for felt. Read more about the Cricut Maker here. -The biggest pro to owning a manual die cutter is the ease of use -there is no tricky technology to learn and even your kindergartener can help!

Can you use Thinlits with a big shot?

Well I've found the answer for you. Both Framelits & Thinlits are dies for cutting your paper with the Big Shot die-cutting machine. You can also use them with the Cuttlebug and other die cutting machines. I only have experience using them with the Big Shot, so that's what these tips are for.

What is the difference between Thinlits and Framelits?

Framelits are generally intended to go around a stamped image or Frame and cut around the outline. Thinlits on the other hand are usually a stand alone die, not intended to frame an image. They are often detailed.

Can you cut felt with regular scissors?

In a pinch, you can transfer and cut patterns from felt using regular printer paper, scotch tape, and a pair of scissors. You likely already have both of these supplies sitting at home!

Can Cricut cut thick felt?

YES! You can cut felt with the Cricut Explore and the Cricut Maker. There are more options for cutting felt with your Maker but you can most definitely cut felt on most of your Cricut machines. The Cricut Maker is my go to felt cutting machine.

Does cutting felt dull scissors?

Nearly everyone speaks highly of these scissors. They are very sharp and retain the sharpness a long time. And due to the titanium coating on the blades, they resist corrosion and adhesives. So if you are cutting felt that has been glued together, you won't ruin the blades.

Can Cricut cut bamboo?

What Type of Felt Can you Cut with a Cricut? I have cut wool, bamboo and polyester felt with my Cricut machine. The method you use to cut the material will depend on your specific fabric. If you felt is not very fuzzy, then the cut is pretty straightforward.

Can Cricut cut acrylic?

Due to the fact that it can cut through thicker acrylic materials, the Cricut Air 2 is the best machine to use for cutting through the acrylic. This is due to the fact that the Cricut Air 2 can cut through acrylic of up to 1mm in thickness, but the Cricut Maker can only cut through a maximum thickness of 0.020mm.

How do you clean a Cricut mat?

Run lukewarm water over the mat, then use a plastic, hard-bristled brush to gently scrub in a circular motion until the entire surface of the mat is clean. Pat the mat dry with a paper towel, then let it air dry completely to ensure stickiness returns. Replace the cover.

Can you make your own dies for sizzix?

NEED A ONE-OF-A-KIND DIE FOR YOUR SIZZIX MACHINE? ... From concept to creation, let our Custom Die Team help you create your own unique die. And it doesn't have to be for just papercrafting. Every day we create dies for possibilities as diverse as fashion, home décor, quilting, appliqué and much more.

Can Thinlits cut faux leather?

Yes it will but you have to have dies not thinlets to cut faux leather.

Can you use dies without a machine?

The truth is you are able to use die cuts without a machine and the aid of any difficult mechanics. ... Die should be put onto the surface with a piece of material on top and the rolling pin should be firmly applied but not so much so that the weak material rips.

Where are Stampin Up Dies made?

STAMPIN' UP'S MFG FACILITY

It's true, our stamps, ink and paper are manufactured in our facility in Kanab, Utah. This facility is a very special place, the employees are passionate about their jobs, and the company.

What is Stampin up replacing the Big Shot with?

Stampin' Up! will be replacing the Big Shot with a new Die Cutting system. This is exciting news, as it means that Stampin' Up! will be working directly with the manufacturer to bring all of us a new die cutting / embossing machine and that we will have more direct control over the design AND availability of products!

Why is cuttlebug being discontinued?

Why is Cricut discontinuing Cuttlebug? Cricut is committed to making amazing products that expand the creative possibilities for all of our members. As we continue to come out with new products, sometimes we have to make hard decisions about existing product lines that we can no longer support.