Measure back 4-5 inches from the rim joist inside your house. Make a mark with a sharpie. If your mark is close to a copper fitting, like an elbow or T, make it 2 inches away from the fitting. This will allow you to push a SharkBite fitting onto your copper pipe inside the house.

How do you measure Sillcock?

Measure the stem from the point where the handwheel attaches to the back of the threads as show above. The measurement is the same for the figure 90 (top) and figure 80 (bottom). Take 2.5” off that measurement to get the length of the sillcock.

How do you measure a frost free stem?

For Anti-Siphon, Frost free sillcock. Measurement listed refers to the length of the stem that is behind the wall. The overall length of the stem is roughly 4in longer. Suggestion for accuracy: measuring the overall length from end to end of the stem and then subtracting 4in to get the length needed for replacement.

How do you measure a frost free hydrant?

Length indicators stamped on bottom side of Wall Hydrant Made Easy™ mounting base. These even-numbered indicators tell you the nominal length (in inches) of hydrant you will need.

How do I know what size hose bib I have?

The most common sizes are usually either ½ inch or ¾ inch. All that this size refers to is the diameter of the pipe. When deciding on the size of hose bib that's right for you, it all comes down to how much pressure you need coming out of the faucet. The smaller the pipe, the stronger the pressure will be.

How to Replace an Outdoor Faucet with a Frost-Proof Sillcock | This Old House

31 related questions found

What is the standard size of an outdoor water faucet?

An outdoor faucet can either be ½ inch or ¾ inch.

The two sizes are also the common widths of water pipes. These sizes refer to the pipe diameter. A 1/2 inch faucet water pipe will have more water pressure than a 3/4 inch one. Keep this in mind when choosing the size you want.

What lengths do frost free faucets come in?

A freezeproof faucet, ranging from 4 to 24 inches in length, extends back into the house, and its valve seat—where the water stops when the faucet is off—is all the way inside.

How tall are frost free hydrants?

Hydrant cannot freeze because when it is closed, all water in the standpipe drains out a hole in the valve which is set in the ground below the frost line. Hydrant spout operates at a convenient height (24 inches) from the ground level so that it can spill into a stock tank.

How do you measure an outdoor faucet stem?

It is easiest for us to identify your stem or handle needs by measuring your stem from the left where the washer is attached to the right where the handle fits on the knurled end (The Broached end).

Are Sillcock stems interchangeable?

The stem and other internal components are not transferable between all manufacturers.

What does ASSE 1019 A mean?

'ASSE-1019-A' is an industry standard for freeze-proof anti-siphon sillcocks: It's not a model number.

What is Sillcock length?

A frost-free hose sillcock or hose bib has a stem that is 6 to 12 inches long. It prevents cold weather from freezing your pipes because the stem washer & seat valve reside inside your house. As an added benefit the anti-siphon stops water or other liquids from being siphoned back into your water supply.

What is the difference between a Sillcock and a hose bib?

These refer to water faucets that are at the exterior of the house. A hose bib has the valve to the water exposed to the outdoors close to the water source. Silcocks have a longer body with the valve at the end of a long rod.

How do you measure fire hydrant bury depth?

Bury depth is the nominal distance from groundline to bottom of connecting pipe. 1'6” through 11' 6” bury depths are available. 2.) For vertical entry bottoms, bury depth is measured to the face of the inlet flange.

Are frost free faucets worth it?

Ultimately, it's up to you. In areas where temperatures consistently dip well below freezing, a frost-free hose bid gives you an extra layer of protection. If you're a person who isn't good about staying on top of winterizing your house, consider the benefit of a frost-free outdoor spigot.

How much does it cost to replace a Sillcock?

Replacing a hose bib, also called a spigot or sillcock, averages $175, or between $100 and $300. New installation raises the price to $200 to $500 depending on the spigot's proximity to existing plumbing.

How do I know if my outdoor faucet is frost free?

Determine if your faucet is frost-free or not.

A rule of thumb is that if the faucet has a knob that's perpendicular to the house, it's frost-free. The knob turns a long stem that closes a valve inside the house where it's warm. If the knob is at a 45 degree angle, it's not frost free, and it needs to be winterized.

What is a frost free hose bib?

A frost-free hose bib (a.k.a. frost proof hose bib) is constructed in such a way that you do not have to shut off the water supply from inside the house to prevent freeze damage in the winter. ... This prevents water from sitting in the pipe and freezing.

What size is a water hose end?

In the US, hoses are normally supplied with a 3/4" GHT fitting on the bib end of the hose so that it can be screwed straight onto the bib. Screw a 3/4 -inch brass or plastic fitting onto the tap.

What are MHT threads?

Common acronym designations have been adopted to easily describe the different types of fittings: MHT = Male Hose Thread. FHT = Female Hose Thread. MPT= Male Pipe Thread. FPT = Female Pipe Thread.